Home > blog > Bathtub Trends > Keep a Hot Tub Clean
Tips for Keeping Your Hot Tub Sparkling Clean
Tips for Keeping Your Hot Tub Sparkling Clean

Tips for Keeping Your Hot Tub Sparkling Clean

September 3, 2023

Keeping a hot tub clean takes commitment and attention. Follow expert advice to keep your hot tub spotless all year. Staying on top of daily, weekly and monthly care is important to avoid problems. Follow a strict routine for clear, clean water ready to use whenever. Though cleaning is dull, don't skip maintenance. Making good habits and fixing issues fast lets you maintain an attractive, relaxing place you'll be proud of, not an ugly mess.

The Importance of Hot Tub Maintenance

Keeping your hot tub clean should be a top priority for all hot tub owners. Proper maintenance keeps the water safe, clear, and ready for soaking anytime. It also protects your investment by preventing issues down the road.

Hot tubs require more care than a standard pool due to the hot water chemistry and potential for bacteria growth. Without a proper hot tub maintenance routine, you risk dirt buildup, cloudy water, clogged pipes, and other problems.

Establishing good maintenance habits from the start is the best way to keep a hot tub clean.

Implementing a Regular Hot Tub Maintenance Schedule

The best way to stay on top of hot tub maintenance is to set a schedule. Daily, weekly, monthly and periodic tasks are essential.

Daily Hot Tub Maintenance

  • Test and adjust chemical levels

  • Add sanitizer like chlorine as needed

  • Check filters and remove debris

  • Wipe down surfaces

Weekly Hot Tub Maintenance

  • Shock treatment to sanitize water

  • Thorough skimming and vacuuming

  • Clean filters with filter cleaner

  • Wipe down headrests and pillows

Monthly Hot Tub Maintenance

  • Deep clean filters by soaking

  • Drain and refill 1/3 of water

  • Use hot tub purge cleaner on jets

  • Clean covers and cabinets

Periodic Hot Tub Maintenance

  • Change filters every 3-6 months

  • Drain and refill completely 2-4 times per year

  • Deep clean with bleach spray 2-4 times per year

Staying on top of weekly and monthly maintenance prevents buildup and keeps your hot tub primed for relaxation anytime.

Must-Have Hot Tub Cleaning Tools

Having the right tools on hand makes hot tub maintenance much easier. Here are some must-haves:

  • Hot tub purge cleaner - Cleans inside jets
  • Telescoping vacuum - Reaches floor debris
  • Skimmer - Removes surface particles
  • Filter cleaner - Dissolves buildup
  • Test strips - Monitors chemical levels
  • Soft scrub brushes - For wiping surfaces

Investing in a quality hot tub purge cleaner, like the Hot Tub Cleaner by Water Tech, makes quick work of blasting debris from inside the jets on a monthly basis.

cleaning - Tips for Keeping Your Hot Tub Sparkling Clean

5 Steps for Hot Tub Cleaning

Follow these steps anytime you clean your hot tub:

1. Flush the Lines and Remove Debris

To maintain optimal conditions and provide a safer and more enjoyable experience for hot tub users, it is recommended to use a specialized line flush product prior to draining and cleaning the system. This procedure ensures that the hot tub's internal components are well-maintained. Dry debris is easiest to deal with. Use a skimmer or net daily to remove leaves, insects and other debris. For sunken debris, use a vacuum.

2. Drain the Hot Tub and Scrub Surfaces

To avoid damage to the hot tub, turn the power off before cleaning it. Wipe down hot tub surfaces weekly or as needed using a soft scrub brush and hot tub surface cleaner. Avoid abrasive scouring pads.

3. Clean Filters

Keeping your hot tub's filter clean can help maintain proper water flow and prevent your system from working harder than it needs to, which can save you energy and keep your hot tub running smoothly. Check filters weekly and clean using specialty filter cleaner. Soak monthly to dissolve mineral buildup and other contaminants.

4. Deep Clean Jets

Attach a hot tub purge cleaner to your hose and thoroughly clean inside all jets monthly. This prevents buildup. Ensure the water is treated with the necessary chemical combination and verify that the levels comply with the manufacturer's recommendations prior to its next use. Shock treat water weekly and change water partial or fully on schedule.

Related reading: How to Clean Jets

5. Protect Surfaces

Use hot tub covers, headrest and pillow protectors, and cabinet protectors to shield surfaces and extend time between deep cleans.

Troubleshooting Common Hot Tub Cleaning Problems

Even with proper maintenance, issues can arise. Here are some common hot tub cleaning problems and solutions:

Cloudy Water

Cloudy or hazy hot tub water is often caused by small particles that are too small to filter out.

Solution: Shock treating with chlorine or other oxidizing shock helps deactivate contaminants. Cleaning filters thoroughly or replacing old filters can help as well. Use a water clarifier to clump particles together for better filtration. In severe cases, draining and refilling the hot tub may be required.

Scum Lines

Scum lines form when oils, lotions and other residues accumulate at the water line.

Solution: Wipe down surfaces above the water line with a hot tub surface cleaner and soft scrub brush weekly. Shock treat water with an oxidizer to deactivate buildup below the water line. In severe cases, a full drain and refill may be needed to fully remove scum residue.

Mold/Mildew

Mold and mildew can grow quickly in damp hot tub environments.

Solution: Prevent it by keeping chlorine levels 2-3 ppm and shocking weekly. To remove existing mold, spray surfaces with a hot tub cleaner containing bleach. Let it sit 5 minutes before wiping thoroughly with a soft brush. Shock treat water and drain/refill if mold growth is extensive.

Smelly Water

A rotten egg or other foul odor is typically caused by too much organic matter, low sanitizer levels or poor circulation.

Solution: Shock treat water with a chlorine or non-chlorine shock to oxidize organics. Test and adjust sanitizer, pH and alkalinity levels. Clean filters if dirty. Drain and refill as a last resort for persistent odors.

Dirty Filters

Dirty filters lead to all kinds of hot water issues.

Solution: For maintenance, soak filters in filter cleaner regularly to dissolve minerals and oils. Replace filters every 3-6 months for optimal contaminant removal. Use two sets of filters and rotate them out weekly for convenience.

Clogged Jets

Mineral scale, oils and debris can gradually clog hot tub jets.

Solution: Attach a purge hot tub cleaner to your hose monthly to forcefully flush jets and prevent buildup. For existing clogs, soak jets in a calcium remover solution. Partially block water flow with a rag to increase force through the jets.

Staying vigilant with regular hot tub maintenance and troubleshooting at the first sign of problems keeps hot tub water clean and safe month after month.

Related article: 5 Methods for How to Unclog a Bathtub

Keeping Your Hot Tub Pristine

Caring for your hot tub doesn't need to be difficult or tedious. By sticking to a maintenance schedule, using the right tools, and following best practices, you can keep your hot tub sparkling clean and ready for relaxation.

Some key tips include:

  • Establish a routine for daily, weekly, and monthly hot tub maintenance.
  • Invest in essential cleaning tools like a vacuum, skimmer, filter cleaner, and quality hot tub purge cleaner.
  • Follow best practices like removing debris promptly, scrubbing surfaces, maintaining water chemistry, and deep cleaning jets.
  • Troubleshoot issues as they arise to prevent bigger problems.

With the right system in place, you can spend more time enjoying your hot tub and less time cleaning it! Let these tips guide you toward hot tub bliss all year long.

Key Takeaways

Keeping your hot tub sparkling clean is easier when you follow a consistent maintenance routine. Establishing a schedule of daily, weekly, and monthly tasks like testing chemistry, shocking the water, cleaning filters, and scrubbing surfaces prevents issues from escalating.

Investing in quality tools such as an effective hot tub purge cleaner for the jets, a telescoping vacuum for the floor, and a sturdy skimmer for the surface simplifies the cleaning process. Always use the right cleaners and brushes designed specifically for hot tubs to avoid damage.

Even if problems do pop up, stay calm and troubleshoot the most likely culprits like dirty filters, low sanitizer levels, residue buildup, or clogged jets. With some targeted maintenance and the right tools, you can tackle any cleaning challenge.

The end result of staying vigilant with hot tub care is sparkling clean water ready for soaking anytime. By dedicating a little time each day, week, and month to follow these maintenance tips, you’ll keep your hot tub clean for years of warm, jet-powered relaxation.

Share on
Subscribe to our newsletter
Get new content, products & promotions in your inbox.