Home > blog > Bathtub Trends > How to Clean a Whirlpool Tub
How to Clean a Whirlpool Tub
How to Clean a Whirlpool Tub

How to Clean a Whirlpool Tub?

July 15, 2023

A whirlpool tub offers numerous advantages. It promotes better circulation, provides relief to achy muscles and joints, and a relaxing soak can be a great stress reliever. However, it's crucial to remember that the tub's jets can accumulate soap scum and harbor bacteria. Even if the grime is not visible, it's important to clean this area of your bathroom at least once a month. Whether you're purchasing a new home with a whirlpool tub or planning to install one in a spa-like bathroom, regular cleaning is essential for maintaining hygiene. In this article we will guide you to clean your whirlpool tub and learn more about whirlpool tubs.

What is A Whirlpool Tub?

A whirlpool tub, also known as a Jacuzzi or jetted tub, is a type of bathtub equipped with built-in jets that create a swirling or whirlpool effect in the water. These water jets emit pressurized water streams, providing a therapeutic and relaxing bathing experience. The swirling action of the jets massages and soothes the body, helping to alleviate tension, promote circulation, and relieve muscle aches and pains. Whirlpool tubs are popular in homes, spas, and wellness centers, offering a luxurious and rejuvenating hydrotherapy experience.

How to Clean Whirlpool Tub Jets?

A whirlpool tub brings luxury and relaxation into your bathroom, offering a soothing and invigorating bathing experience. To ensure its optimal performance and longevity, regular cleaning is essential. In this guide, we will walk you through the step-by-step process of cleaning a whirlpool tub, allowing you to maintain a sparkling and hygienic bathing environment.

Step 1: Gather Your Supplies

Before you embark on cleaning your whirlpool tub, gather the necessary supplies. You will need:

  • Mild dish soap or dedicated whirlpool tub cleaner
  • White vinegar
  • Baking soda
  • Soft sponge or cloth
  • Small brush (such as an old toothbrush)
  • Rubber gloves
  • Clean water

Step 2: Drain the Tub

Start by draining the whirlpool tub completely. Ensure that the water is emptied, and the jets are turned off. This step is crucial before cleaning to prevent any debris or residue from being circulated during the cleaning process.

Step 3: Prepare the Cleaning Solution

Fill the tub with warm water, approximately 2-3 inches above the jets. Add a few drops of mild dish soap or a whirlpool tub cleaner, following the manufacturer's instructions. Alternatively, you can also use a mixture of equal parts water and white vinegar for a natural cleaning solution. Both options effectively remove built-up grime and residue from the tub's surfaces and jets.

Step 4: Run the Whirlpool Jets

Turn on the whirlpool jets and let them run for 15-20 minutes. This allows the cleaning solution to circulate through the system, reaching all the nooks and crannies of the tub and jets. The agitation of the water helps dislodge any accumulated dirt or deposits.

Step 5: Scrub the Surfaces

Using a soft sponge or cloth, gently scrub the surfaces of the tub, including the walls, seats, and any visible debris or stains. Pay extra attention to areas around the jets and controls. For stubborn stains or residue, create a paste using baking soda and water. Apply the paste to the affected areas and scrub with a small brush, such as an old toothbrush, to lift the grime.

Step 6: Clean the Jets

To thoroughly clean the jets, turn off the whirlpool system and remove any removable jet covers or nozzles, following the manufacturer's instructions. Soak the covers in a mixture of warm water and mild soap or vinegar solution. Use a soft brush to clean the inside and outside of the covers, removing any residue or debris.

Next, use the brush to gently scrub inside the jet openings, removing any buildup or dirt. Be thorough but cautious to avoid damaging the jets. Rinse the jets and covers with clean water to remove any remaining cleaning solution.

Step 7: Rinse and Dry

Once you've completed the cleaning process, drain the tub and rinse it with clean water to ensure that all cleaning solution residues are removed. Wipe down the surfaces with a clean cloth to dry, paying special attention to any moisture-prone areas. Proper drying helps prevent the growth of mold or mildew.

FAQs about Whirlpool Tubs

Is a whirlpool a hot tub?

A whirlpool refers to a type of jetted bathtub or bath that is typically installed indoors in a bathroom. It features built-in jets that create a swirling water motion, providing a relaxing and massaging experience. Whirlpool tubs are generally smaller in size and designed for individual use rather than accommodating multiple people.

On the other hand, a hot tub is an outdoor, self-contained unit specifically designed for therapeutic purposes and relaxation. It is larger in size and is typically capable of accommodating multiple individuals simultaneously. Hot tubs are equipped with heating elements that can maintain the hot tub water temperature at a high level, usually around 100-104°F (37-40°C).

All in all, whirlpools are generally found indoors and are smaller, intended for personal use in a bathroom setting. Hot tubs, on the other hand, are usually placed outdoors and offer a larger capacity, making them suitable for socializing and soaking in hot water.

Are whirlpool tubs worth it?

Whirlpool tubs are worth it for many individuals seeking a luxurious and therapeutic bathing experience. The swirling jets provide a relaxing massage-like sensation that can help relieve muscle tension and promote relaxation. Additionally, whirlpool tubs can enhance the ambiance of a bathroom and provide a spa-like atmosphere. However, the value of a whirlpool tub depends on personal preferences and needs. Consider factors such as budget, space availability, and frequency of use before making a decision. Read more:

Are Epsom salts safe for whirlpool tubs?

Yes, Epsom salts are generally safe for whirlpool tubs. However, it's not recommended to use Epsom salts because excessive use of Epsom salts may cause build-up or potential damage to the tub's jets or internal components. Undissolved salts may clog the tub's jets as well. Contact Empava support team if you have any problem with Empava whirlpool bathtubs.

Share on
Subscribe to our newsletter
Get new content, products & promotions in your inbox.